Wireless Restaurant Pager

In stock

Electronics > Communications > Pagers


$269.00 $5.26

Model: RDX1000S1 | Wireless Pager for Restaurant, Hotel, Hospital, Nursing Home; Host Screen Be Able to Broadcast the Call Number to Note Waiter Once Bell Button Be Pressed.


Wireless calling system could solve the traditional reception problem:
When the guest needs to call a waiter, he/she can press down the pager button. The host screen will voice broadcast and display the call number, from it, the waiter is able to know which/where the guest needs help, then he could go to the table immediately(avoid that this waiter going around in the restaurant), which can create a more comfortable situation for the guests.

restaurant pager work process

Wireless calling system(wireless bell) could provide the in-time service for customers in every situation. It has easy installation and beautiful features. It could promote the image of service situation.
This wireless call pager has not any wire connection between the buttons and the host screen, the real connection is a wireless 433M wireless signal. Following our user guide, anyone can do the installation without any electronics technician's help.

1. It can reduce service cost;
2. It can improve customer satisfaction;
3. It can improve your place level with fashion appearance;
4. It can improve your service quality and efficiency;
5. Its installation is very easy. Because it is wireless, after setting, you can stick the button where you like.

This system is widely used in entertainment or catering industry, such as hotels, restaurants, tea house, coffee houses and bars, night club, food court, cake, shop, office, Saloon,casino,Cafeteria,KTV...


Who are using RingDiDo Wireless Pagers

wireless pager use case | RingDiDo


Screen Host (Receiver): RDX1000

- Dimensions:202mm X 130mm X 30mm
- Net weight: 350g
- Outer material: ABS
- Decoding type: Registration method
- Power supply: 100-240V AC 50/60Hz
- Power output:  DC12V/1A
- Receiver sensibility: -114dbm
- Frequency:433Mhz
- Call button capability: 199
- Prompt modes: Dingdong、Alarming sound、English voice report
- Display time: 1~99 seconds,00 means infinite
- English letter beginning display: A, B , C, D , E,F,H,P,L,J.


Call Button(Transmitter): RDX100

- Dimensions :60mm * 60mm * 32mm
- Net weight: 53.8g
- Frequency:433.92Mhz
- Battery:Alkaline Battery 12V23A
- Call output:20dB uV/m
- Frequency deviation:0.5Mhz
- Signal transmitting distance: 1.5km(open space)
- Decoding type:Registration method
- Battery life:12-18 months

Signal Amplifier: RDX80

- Dimensions:153mm * 82mm * 29mm
- Net weight:200g
- Frequency:433.92Mhz
- Power supply: AC220V/60HZ-DC12V/1A
- Signal transmitting distance: 2.5km(open space)
- Transmitting mode: transmit all signal or transmit part of signal


[More Specifcation]

 Host Screen(Receiver): RDX1000, powered by 110~220V AC
1. The receiver can display one group of 3 digits and store 10 numbers scrolling display, the number will display according to the calling time in the setting time, and can be deleted automatically or by hand after the set time.
2. The registered numbers can not be registered repeatedly or wrongly again when disturbed by other pagers or other interference sources. After registering one number, it will jump to the next number automatically, making the registration faster and more convenient.
3. The receiver has three prompt modes: Dingdong, alarming sound and voice report. User can regulate it according to real reeds.
4. The receiver can store 999 call buttons, numbers are from 001-999, English letters are from A01-A99 and so on(the English letters include ABCDEFHPHL).
5. The calling number display time can be set to what you want when the set time is out, the called number can be deleted automatically. You also can set the time to infinite long and delete the called number by hand.
6. The receiver can be chosen the number display mode: all digital or beginning with an English letter.
7. Dimensions: 202mm*130mm*30mm;
Button(Transmitter): RDX100, powered by a battery 
1. SAW DVICE aeronautical communications are used to ensure the stability of the signal transmission.It has built-in channel anti-mixing function and is equipped with built-in timing circuit design, with superiorly stable login mode, the phenomenon of messy code does not appear.
2. Anti-temperature and humidity changes.
3. The number can be changed optionally with strong re-use ability
4. Dimensions: 60mm*60mm*32mm
5. Battery: Alkaline Battery 12V23A/one

Signal Amplifier: RDX80, powered by 110~220V AC
1. The function of Signal Amplifier is to relay the button wireless signal and enhance the signal quality. By the way of installing more signal amplifiers we can make the receivers receive all the button signal well even there are a lot of obstacles wall among them or their distance is far. No signal amplifier is applied but only when the installed receiver(the host) can not receive all the signals transmitted by the pager.
2. In our engineering experience, it is necessary to install a signal amplifier if the distance is beyond 50 meters and there are some walls between buttons and receivers. If you have more questions, can contact with us, we can evaluate your place condition and help you design your customized calling system, also help to decide if need signal amplifier or not.



[Q]How far is this wireless pager system able to work?
It is about 500m-1000m distance(from buttons to receiver screen) in free space. But it depends on real surrounding, normally, our system is able to work well if the distance is below 50m and even with some walls, tree or other obstacles(not metallic). However, if install a signal amplifier device, it will make it work much longer.
We can help you design your side customized calling system if you need, please no hesitate to contact with us.

[Q]Are there any interference among different calling system or between the calling system and another communication device?
No worry, there would not any interference since we apply encryption technology in this system.

[Q]How long is the battery life in this calling system?
The button uses 12V23A battery, normally it is able to work about 12months depending on your side calling frequency. When the battery is run out, replace it with a new one.

[Q]How to do pair to make it work?
No worry, we will do pair first before delivery. Once received,it can work properly.

- Screen Host (Receiver) RX1000: n pcs, depending on your requirement
- Button (Transmitter) RX100: n pcs, depending on your requirement
- Signal Amplifier RX80: optional
- User Manual

[Contact Us]
All our listing products have rich inventory, you can place a bulk order or even only buy ONE set, it is OK. We will ship the goods immediately once get your order.
If you have any questions or if you want to do some customization, welcome to contact with us by the online instant message, or by following contact way.


 Email: support@ringdido.com              Skype: ringdido             Facebook: https://www.facebook.com/ringdido/   
WhatsApp: +86 13186854589               Line:  ringdido              Viber: +86 13186854589   
 VK: @id519466949                              QQ: 33148115               Wechat:  i4inch


Since our working time is 9:00- 18:00 (Monday to Friday) Chinese Beijing time, if you didn't get our reply timely, strongly recommend you to send us an Email :
we will reply to you in 24 hours, thank you very much!